This paper discusses and compares the different pre-coating of steel surface cleanliness standards for hand and power tool, wet and dry abrasive blasting, and water jetting prepared by ISO, SSPC, & NACE, with the AS 1627 series of Standards.
8th November 2023
This is an extract from a presentation to the ACA Coatings Technical Group Forum by Willie Mandeno at Corrosion & Prevention 2023 in Perth this November.
30th October 2023
We are excited to announce our revived Roadshow that will travel down the East Coast of Australia.
19th June 2023
To investigate the corrosion resistance of overlapping layers between Al-5Mg thermal spray coating and heavy-duty coating, this study aims to clarify the deterioration behaviours of the cases with different boundary connection modes. The linear and ribbon defects were introduced to specimens, and the accelerated corrosion tests were performed. Besides, a laser focus measuring system was...
21st July 2021
Presented by Miles Buckhurst Miles Buckhurst from Jotun Norway talking about the big picture of corrosion control and the real costs and savings of effective mitigation. Filmed at the 2015 Corrosion & Prevention Conference.
7th April 2020
The ACA APGA Joint Pipeline Corrosion Management technical seminar addressed some of the challenges and solutions for preventing corrosion in pipelines, some of our most vital infrastructure. Presentations on technologies such as materials selection, coatings and cathodic protection used to attain the desired design life of our assets were discussed. Speakers shared their experiences by...
6th August 2018
This 2013 publication includes over 30 Technical Papers focusing on Inorganic Zinc Coatings. The papers in this publication come from two main sources; the first eight papers were presented at the seminars run in 1997 and 1998 in Australia and New Zealand and the second group of papers are papers from local authors presented at...
22nd May 2017